Jump to the main content

Search Video Editing Help

Timecode Explained: Frames, Drop-Frame and 23.976 vs 24

Author: First published Topic: Digital

Timecode labels every video frame as hours:minutes:seconds:frames. At whole-number rates such as 24 or 25 fps the label matches the clock. At 29.97 fps a 30-per-second count runs slow, so drop-frame timecode skips two frame numbers every minute except each tenth minute, and shows a semicolon. Frames convert to timecode by division, using the exact rate.

An editing keyboard and jog wheel beside a dark monitor

Part of the series: MOV Files and Video Codecs Explained: MP4, ProRes, H.264, WebM

Timecode gives every frame of a video an address, written hours:minutes:seconds:frames, and our free frames-to-timecode converter converts between frame counts and those addresses at every common frame rate. This guide explains the rules behind it, including why 29.97 needs drop-frame and why 23.976 is not 24, so that you can check a result by hand. It belongs to our codec and format guides, which start with the MOV guide.

What is timecode, and how does it count frames?

Timecode counts frames in each second from 00 up to one less than the frame rate. At 24 fps the frames run 00 to 23; at 25 fps, 00 to 24; at 30 fps, 00 to 29. When the frames reach the rate, the seconds go up by one.

At whole-number rates the arithmetic is simple. One hour of 24 fps video is 24 x 3,600 = 86,400 frames, so frame 86,400 is 01:00:00:00. Dividing a frame count by the rate gives total seconds, and from that hours, minutes and seconds follow. The remainder is the frame field.

Why are some frame rates 23.976, 29.97 and 59.94?

They are the whole-number rates slowed by 1000/1001. Apple’s technical note lists the exact forms for media sent to Final Cut Pro: 23.976 fps is 24000/1001, 29.97 fps is 30000/1001 and 59.94 fps is 60000/1001. Each is one part in 1001 slower than 24, 30 or 60, about 0.1%.

Name Exact rate Decimal
23.976 24000/1001 23.97602
29.97 30000/1001 29.97003
59.94 60000/1001 59.94006

Apple’s note also says Final Cut Pro prefers the 24000/1001 form for 23.976, because it is very clear without the application examining sample tables.

What is the difference between 24 and 23.976 fps?

True 24 fps is exactly 24 frames per second, and 23.976 is 24000/1001, which is 0.1% slower. The timecode looks identical because both count 00 to 23, but the real running time differs. One hour at 23.976 holds about 86,314 frames against 86,400 at 24 fps, a difference of about 86 frames, or 3.6 seconds.

That is why a project must match its footage. Cutting 23.976 material on a 24 fps timeline, or the reverse, makes timecode, audio sync and exports drift over long clips. Check the rate of your files before you create the project.

What is drop-frame timecode?

It is a labeling scheme that keeps 29.97 fps timecode in step with the clock. Counted at 30 frames per second, 29.97 fps footage falls behind real time by about 3.6 seconds in an hour, which is 108 frames. Drop-frame skips frame numbers to make up that difference.

Apple’s Compressor glossary describes it as a format that “prioritizes representing time elapsed instead of frames elapsed when a clip is not 30 fps,” typically with a semicolon between seconds and frames. A RODE help page gives the rule for 29.97: certain frame numbers are skipped, except every tenth minute, and the skipped numbers are typically 0 and 1. So at the start of each minute, 00:00:59;29 is followed by 00:01:00;02, except at minutes 10, 20, 30 and so on.

Do not read “drop” as lost video. Apple’s glossary notes that using drop-frame “does not mean your transcoded video will have dropped frames.” Only the numbering changes.

Non-drop (29.97 NDF) Drop-frame (29.97 DF)
Separator before frames Colon Semicolon
Frame numbers skipped None 00 and 01 each minute except every tenth
Numbers skipped per hour 0 108
Matches the clock Drifts about 3.6 seconds per hour Stays close to the clock
Frames in one hour 107,892 107,892

How do I convert frames to timecode?

Divide by the rate, working up through frames, seconds, minutes and hours. For 29.97 drop-frame, first work out how many numbers have been skipped and add them back.

The key counts for 29.97 drop-frame are:

  • The first minute holds 1,800 frames (00:00:00;00 to 00:00:59;29).
  • Each later minute in the ten-minute block holds 1,798 frames, because two numbers are skipped.
  • A full ten-minute block holds 1,800 + 9 x 1,798 = 17,982 frames.
  • One hour is 6 x 17,982 = 107,892 frames, the same as 30,000/1,001 x 3,600.

You can do this by hand with the block counts, but the converter is quicker and avoids slips. The aspect side of the same projects is covered in the aspect ratio guide.

Worked example: frame 1,800 at 29.97 drop-frame

  1. Frames 0 to 1,799 fill the first minute (00:00:00;00 to 00:00:59;29).
  2. Frame 1,800 starts the second minute. Numbers 00 and 01 are skipped, so its label is 00:01:00;02.
  3. Check with the tenth minute: frame 17,982 is 00:10:00;00, because the tenth minute skips nothing.

How do I add or subtract timecode?

Convert to frames, do the arithmetic, then convert back at the same rate. Adding 00:00:10:12 to 00:01:00:00 at 24 fps: 10 x 24 + 12 = 252 frames, plus 60 x 24 = 1,440 frames, gives 1,692 frames. That is 1,692 / 24 = 70.5 seconds, or 00:01:10:12.

Never add the fields directly across a frame boundary without carrying, and never mix rates. At 29.97 drop-frame, convert through frame counts so that skipped numbers are handled for you. For Resolve, Premiere and Final Cut specifics, check each editor’s own timecode settings, because the display is set per project or per clip.

Where do I go next?

For the cost of all those frames on disk, see video bitrate and file size. For problems importing footage shot at an unusual rate, read which formats your editor supports.

Common frame rates and how their timecode counts
RateExact valueFrame field countsDrift from the clock
24 fps2400 to 23None
23.976 fps24000/100100 to 23About 3.6 s per hour behind a 24 fps count
25 fps2500 to 24None
29.97 fps non-drop30000/100100 to 29About 3.6 s per hour behind the clock
29.97 fps drop-frame30000/100100 to 29, with 00 and 01 skipped each minute except every tenthStays close to the clock

Use drop-frame for 29.97 programs that must match clock time, such as broadcast. Use non-drop when only frame accuracy matters. Always match the project rate to the footage.

Answers to common questions

What is drop-frame timecode?

Drop-frame timecode is a way of numbering frames at 29.97 fps so the timecode stays close to the clock. It skips the frame numbers 00 and 01 at the start of every minute except each tenth minute, which removes 108 numbers an hour. Apple's Compressor glossary notes that no video frames are dropped, only numbers, and that drop-frame typically shows a semicolon before the frames.

Why is the frame rate 29.97 and not 30?

Apple's technical note lists the NTSC-style rates as fractions: 29.97 fps is 30000/1001, 23.976 is 24000/1001 and 59.94 is 60000/1001. Each is one part in 1001 slower than its whole-number rate, about 0.1%. That is why a 29.97 clip is a hair slower than 30 and why timecode counting at 30 per second drifts from the clock.

How do I convert frames to timecode?

At a whole-number rate, divide the frame count by the rate. Hours are the frames divided by rate times 3600, and the remainder repeats for minutes, seconds and frames. For example, 86,400 frames at 24 fps is 86,400 / 24 = 3,600 seconds, which is 01:00:00:00. At 29.97 drop-frame you must first add back the skipped frame numbers, so use the calculator for that case.

What is the difference between 24 and 23.976 fps?

True 24 fps is exactly 24 frames each second. 23.976 fps is 24000/1001, about 23.97602, which is 0.1% slower. Both are counted 00 to 23 in timecode, so they look the same on screen, but over an hour 23.976 produces about 86 fewer frames than 24 fps. Mixing them in one project causes drift and sync problems, so set your project to the rate of your footage.

How do I add or subtract timecode?

Convert each timecode to a frame count, add or subtract the counts, then convert the result back at the same rate. Adding 00:00:10:12 to 00:01:00:00 at 24 fps is 240 + 12 = 252 frames plus 1,440 frames, which is 1,692 frames, or 00:01:10:12. At 29.97 drop-frame the same method works, but the conversion must account for dropped numbers.

Does drop-frame change how long my video is?

No. The video has the same frames and the same running time in both cases. Drop-frame changes only the labels, so the timecode matches wall-clock time. Non-drop timecode at 29.97 runs about 3.6 seconds behind the clock each hour, which matters for programs that must fit a broadcast slot. For a web video the difference is usually unimportant.

Evidence and sources

  1. Apple Technical Q&A QA1447: Final Cut Pro X preferred video media time scales and sample durations (developer.apple.com)
  2. Apple Compressor User Guide: glossary entry for drop frame timecode (support.apple.com)
  3. RODE Help Centre: the difference between 29.97 and 29.97 DF (help.rode.com)

More on this topic

Return to top